Updated @ 16:28 13th April 2012
I’m playing catch-up here. The contents of this post refer to work over two days old, delay in writing it up is due to other, more pressing matters.
The good news is that after using LineGrinder to generate the G-Code from my little PCB, the two mysteriously-missing areas on the [...]
I took a walk in Gateshead this morning. I had business at the Civic Centre, so thought I would check on progress (if any) that Gateshead Council had made in tidying up the disgraceful state of the once-proud Gateshead High Street. I documented my walk with pictures, all 250Mb of which are too much to [...]
A great deal of what we see on the Web, project-wise, is the ‘finished’ product. Every questionable decision has been ‘revisioned’, and what warts remain are carefully hidden, or presented as ‘features’. Yeah, I know this is a pretty cynical view, but unfortunately, nearer the truth, than even I would like to admit.
One of the [...]
A Simple Thumb Drive G-Code Delivery System
Updated with File System Source-Code & example of logging 15th April 2012
This post in one in a series. Other posts you may be interested in are as follows:
Converting a Proxxon MF70 Milling Machine To CNC – 1: Introduction.
Converting a Proxxon MF70 Milling Machine To CNC – 2: The User [...]
No, you aren’t getting my Mobile number.
If you persist in asking me – I will close my gmail account.
Send article as PDF