Print This Post Print This Post

Converting a Proxxon MF70 Milling Machine To CNC – 3

Controlling the MF70 Spindle Speed

Updated 28th April 2012 with Eagle Schematic and Printed Circuit Board Design.

This post in one in a series. Other posts you may be interested in are as follows:

Converting a Proxxon MF70 Milling Machine To CNC – 1: Introduction.
Converting a Proxxon MF70 Milling Machine To CNC – 2: The User Interface.
Converting a [...]

  • Share/Bookmark
Print This Post Print This Post

Converting a Proxxon MF70 Milling Machine To CNC – 2

The User Interface

This post in one in a series. Other posts you may be interested in are as follows:

Converting a Proxxon MF70 Milling Machine To CNC – 1: Introduction.
Converting a Proxxon MF70 Milling Machine To CNC – 3: Controlling the MF70 Spindle Speed.
Converting a Proxxon MF70 Milling Machine To CNC – 4: A Simple Thumb [...]

  • Share/Bookmark
Print This Post Print This Post

Converting a Proxxon MF70 Milling Machine To CNC – 1

Overview

This post in one in a series. Other posts you may be interested in are as follows:

Converting a Proxxon MF70 Milling Machine To CNC – 2: The User Interface.
Converting a Proxxon MF70 Milling Machine To CNC – 3: Controlling the MF70 Spindle Speed.
Converting a Proxxon MF70 Milling Machine To CNC – 4: A Simple Thumb [...]

  • Share/Bookmark
Print This Post Print This Post

Why am I bad at Maths?

After a long and successful career in Software Engineering, it is assumed by most who meet me, that I am good at Math – I’m not.
Arithmetic and number systems – yes; Analysis – yes; But when it comes to all the weird squiggly stuff, which shifts around on the paper in front of me, I [...]

  • Share/Bookmark